公开文献目录 · 657

已审核文献 81445 · 657 / 815

• Optimizing and comparing gap-filling techniques using simulated NDVI time series from remotely sensed global data

  International Journal of Applied Earth Observation and Geoinformation · 2019

  Yves Julien, José A. Sobrino

  DOI: 10.1016/j.jag.2018.11.008

• FGFR2-responsive self-assembled hydrogel releases its inhibitor to suppress the progression of endometriosis

  Journal of Controlled Release · 2026

  Panmei Ma, Shen Wang, Xier Zhang, Nana Li, Lu Xu, An Huang, Wenjun Zhan, Guangfeng Zhao, Dan Liu, Jiawen Sun, Gaolin Liang, Qiao Weng

  DOI: 10.1016/j.jconrel.2026.115007

• Synergies and trade-offs in achieving sustainable targets of urban renewal: A decision-making support framework

  Environment and Planning B: Urban Analytics and City Science · 2025

  Anqi Wang, Wei Zheng, Zheng Tan, Mingqing Han, Edwin HW Chan

  DOI: 10.1177/23998083241261750

• SHF-MSA: A Hypergraph-Based Multimodal Sentiment Analysis Model

  IEEE Transactions on Affective Computing · 2026

  Zhiguo Yu, Zixuan Li, Peng Li

  DOI: 10.1109/taffc.2026.3722051

• Long-term real-world outcomes and tolerability of baricitinib in alopecia areata, totalis, and universalis: A retrospective single-center cohort of 330 patients with trichoscopy monitoring

  Journal of the American Academy of Dermatology · 2026

  Xin Ran, Ying Huang, Zhi Zhang, Runyan Gao, Jitong Sun, Kaiwen Zhuang, Lina Li, Zimeng You, Lu Zheng, Xinyao Liu, Muqiu Zhang, Yuan Chen, Xiaoxi Xu, Zihan Zhao, Yaling Dai, Yuping Ran

  DOI: 10.1016/j.jaad.2026.07.031

• Corporate green bonds

  Journal of Financial Economics · 2021

  Caroline Flammer

  DOI: 10.1016/j.jfineco.2021.01.010

• Identifying winning strategies: analysis of play-types in professional European basketball leagues

  International Journal of Performance Analysis in Sport · 2025

  Enrique Alonso-Pérez-Chao, Hugo Salazar, Álvaro Bustamante-Sánchez, Pierpaolo Sansone, Alberto Lorenzo

  DOI: 10.1080/24748668.2025.2487324

• Experimental evaluation of the shear performance of steel-asphalt interface considering temperature and humidity coupling

  International Journal of Adhesion and Adhesives · 2018

  Yun Liu, Bo Yao, Changquan Yu, Jiantao Wu, Jun Chen, Lei Zhang

  DOI: 10.1016/j.ijadhadh.2018.04.011

• Denitrification potential of low-grade weirs and agricultural drainage ditch sediments in the Lower Mississippi Alluvial Valley

  Ecological Engineering · 2014

  Robert Kröger, J. Thad Scott, Joby M. Prince Czarnecki

  DOI: 10.1016/j.ecoleng.2014.09.019

• Assessment of seismic landslide susceptibility of bedrock and overburden layer slope based on shaking table tests

  Engineering Geology · 2023

  Changwei Yang, Xinhao Tong, Guangpeng Chen, Cheng Yuan, Jing Lian

  DOI: 10.1016/j.enggeo.2023.107197

• Seismic responses and shattering cumulative effects of bedding parallel stepped rock slope: Model test and numerical simulation

  Journal of Rock Mechanics and Geotechnical Engineering · 2025

  Chunlei Xin, Fei Yang, Wenkai Feng, Zhao Wang, Wenhui Li

  DOI: 10.1016/j.jrmge.2024.03.031

• Dynamic Instability Mechanism of Bedding Rock Slopes Under the Influence of Earthquakes

  Advances in Civil Engineering · 2025

  Hanhua Xu, Sugang Sui, Weijie Tian, Xun Bao, Junpeng Zou, Quan Zhang, Shijing He

  DOI: 10.1155/adce/5517053

• Experimental study on dynamic response and failure mode of bedding rock slope with cracks under earthquake

  Bulletin of Engineering Geology and the Environment · 2025

  Po Cheng, Yong Liu, Jun Hu, Kun Fang, Yao Hu

  DOI: 10.1007/s10064-025-04100-w

• Investigation of Rheological Properties of Molten Materials for Dripping Pills Based on Imaging Monitoring

  Phytochemical Analysis · 2025

  Ying Tian, Hang Chen, Jie Zhao, Geng Tian, Haibin Qu

  DOI: 10.1002/pca.3457

• Fraction metabolized by cytochrome P450 enzymes: A comprehensive evaluation of the translatability of an in vitro HepatoPac assay

  Drug Metabolism and Disposition · 2026

  Florian Klammers, Thanusa Shanmugalingam, Tobias Remus, Alexander Schriewer, Isabelle Walter, Neil Parrott, Kenichi Umehara

  DOI: 10.1016/j.dmd.2025.100223

• ADMET tools: Prediction and assessment of chemical ADMET properties of NCEs

  Concepts and Experimental Protocols of Modelling and Informatics in Drug Design · 2021

  Om Silakari, Pankaj Kumar Singh

  DOI: 10.1016/b978-0-12-820546-4.00014-3

• Laboratory Tests and Diagnostic Procedures

  Massachusetts General Hospital Comprehensive Clinical Psychiatry · 2008

  Felicia A. Smith

  DOI: 10.1016/b978-0-323-04743-2.50005-6

• Effect of Gd addition on LPBF-fabricated GH3535 alloy: A systematic study on printability, microstructural evolution, and mechanical properties

  Materials Science and Engineering: A · 2026

  Yapeng Ma, Qingchun Zhu, Xin Fu, Cong Fan, Yanhui Wang, Leijie Zhao, Li Jiang, Zhijun Li

  DOI: 10.1016/j.msea.2026.150537

• Implant placement post extraction in esthetic single tooth sites: when immediate, when early, when late?

  Periodontology 2000 · 2017

  Daniel Buser, Vivianne Chappuis, Urs C. Belser, Stephen Chen

  DOI: 10.1111/prd.12170

• Analysis of the socket bone wall dimensions in the upper maxilla in relation to immediate implant placement

  Clinical Oral Implants Research · 2010

  Guy Huynh‐Ba, Bjarni E. Pjetursson, Mariano Sanz, Denis Cecchinato, Jorge Ferrus, Jan Lindhe, Niklaus P. Lang

  DOI: 10.1111/j.1600-0501.2009.01870.x

• Classification of Sagittal Root Position and Angulation of Premolars for Immediate Implant Placement: A Cone Beam Computed Tomography Study

  The International Journal of Oral & Maxillofacial Implants · 2020

  Yalin Zhan, Miaozhen Wang, Xueyuan Cheng, Feng Liu

  DOI: 10.21203/rs.3.rs-45863/v1

• Artificial intelligence in drug discovery — what it is, where we stand and the path forward

  Nature Reviews Drug Discovery · 2026

  Andreas Bender, Morgan C. Thomas, Jack W. Scannell, David A. Shaywitz, Gian Marco Ghiandoni, Joe G. Greener, Lavinia-Lorena Pruteanu, Rachel DeVay Jacobson, Koichi Handa, Mariko Hirano, Srijit Seal, Manas Mahale, Marco F. Schmidt, Tim Ahfeldt, Francesca Grisoni, Isidro Cortes-Ciriano

  DOI: 10.1038/s41573-026-01496-2

• Ridge Alterations Post-extraction in the Esthetic Zone: A 3D Analysis with CBCT

  Journal of Dental Research · 2013

  V. Chappuis, O. Engel, M. Reyes, K. Shahim, L.-P. Nolte, D. Buser

  DOI: 10.1177/0022034513506713

• Clinical Practice Guidelines for ERAS in China(2021)(III)

  DOAJ (DOAJ: Directory of Open Access Journals) · 2021

  Chinese Society of Surgery, Chinese Society of Anesthesiology

  DOI: 10.12290/xhyxzz.20210003

• 胰十二指肠切除术后早期给予低分子肝素钠预防静脉血栓栓塞的有效性和安全性分析

  中国普外基础与临床杂志 · 2021

  吕志明, 管发彬, 苏力担卡扎·仇曼, 耿诚, 何铁英

  DOI: 10.7507/1007-9424.202008074

• 基于多维风险分析的结构化护理方案在预防胰腺肿瘤手术患者静脉血栓栓塞症中的应用

  国际护理学杂志 · 2024

  吴丹, 王丽华, 王莉

  DOI: 10.3760/cma.j.cn221370-20230427-00471

• MDT-ERAS 与常规ERAS 在机器人胰十二指肠切除术围术期中的应用效果对比研究

  循证医学 · 2025

  王爱妹, 熊代兰, 丁艳玲, 代琳琳, 邓燕英

  DOI: 10.12019/j.issn.1671-5144.202506003

• Enhanced Recovery After Surgery (ERAS) in Pancreatic Surgery: The Surgeon's Point of View

  Journal of Clinical Medicine · 2024

  Fabio Longo, Edoardo Panza, Lorenzo Rocca, Beatrice Biffoni, Chiara Lucinato, Marco Cintoni, Maria Cristina Mele, Valerio Papa, Claudio Fiorillo, Giuseppe Quero, Davide De Sio, Roberta Menghi, Sergio Alfieri, Lodovica Langellotti

  DOI: 10.3390/jcm13206205

• 合并多系统疾病老年患者腹腔镜胰十二指肠切除术的麻醉与围术期管理

  中华麻醉学杂志 · 2023

  安欣璨, 赵磊, 曹峰, 尹春琳, 薛张纲, 陆智杰, 孟庆涛, 王锷, 徐桂萍, 王月兰, 雷迁, 王天龙

  DOI: 10.3760/cma.j.cn131073.20230404.00724

• 急危重症患者手术护理专家共识

  中华现代护理杂志 · 2024

  北京护理学会手术室专业委员会, 中日友好医院

  DOI: 10.3760/cma.j.cn115682-20240412-02011

• A novel digital and visualized guided bone regeneration procedure and digital precise bone augmentation: A case series

  Clinical Implant Dentistry and Related Research · 2021

  Songhang Li, Tianxu Zhang, Mi Zhou, Xiaolin Zhang, Yang Gao, Xiaoxiao Cai

  DOI: 10.1111/cid.12959

• 3D-ink-extruded titanium scaffolds with strut microchannels templated from steel fibers

  Materials Science and Engineering: A · 2026

  John P. Misiaszek, David C. Dunand

  DOI: 10.1016/j.msea.2026.150465

• Charging-protocol-dependent hydride precipitation and hydrogen embrittlement in Ti–4Al–2V alloys

  Materials Science and Engineering: A · 2026

  Xiaolong Mi, Xiao-Ye Zhou, Hong-Hui Wu, Jun Cheng, Meisa Zhou, Lifei Wang, Xinping Mao

  DOI: 10.1016/j.msea.2026.150589

• Achieving a simultaneous improvement of strength, thermal conductivity, and thermal stability in Al-Ce composites via TiB2-mediated microstructural architecture

  Materials Science and Engineering: A · 2026

  Donghu Zhou, Xuekai Li, Linwei Li, Kai Zhao, Yanqiang Li, Huijun Kang, Enyu Guo, Jiehua Li, Zongning Chen, Tongmin Wang

  DOI: 10.1016/j.msea.2026.150527

• Achieving high-strength and ductile arc welds in AA7075 via grain refinement with a novel Sc/Zr-modified filler wire

  Materials Science and Engineering: A · 2026

  Siyue Fan, Zexun Sun, Beibei Wang, Peng Xue, Rongzheng Xu, Xuming Guo, Zhen Zhang, Dingrui Ni, Bolv Xiao, Zongyi Ma

  DOI: 10.1016/j.msea.2026.150596

• Abnormal ductility-toughness trade-off in ultrahigh-strength heterostructured dual-phase steels

  Materials Science and Engineering: A · 2026

  Zhichao Luo, Lang Liu, Xingjian Gao, Jiazhen He, Qifan Zhang, Liejun Li, Kaihong Zheng

  DOI: 10.1016/j.msea.2026.150535

• Corrigendum to “High strength and conductivity: Functional gradient design in reduced graphene oxide + carbon nanotube hybrid Al nanolaminated composites” [Mater. Sci. Eng.: A 951 (2025) 149628]

  Materials Science and Engineering: A · 2026

  Behzad Sadeghi, Pasquale Cavaliere, Mohammad Velashjerdi, Behzad Sadeghian, Aboozar Taherizadeh, Luciano Lamberti, Catalin Pruncu, Christoph Gammer, Naser Hosseini, Jürgen Eckert

  DOI: 10.1016/j.msea.2026.150651

• CO2-induced degradation of creep properties in austenitic steel 347H and the effect of specimen thickness

  Materials Science and Engineering: A · 2026

  Kyle A. Rozman, Richard P. Oleksak, Ömer Doğan

  DOI: 10.1016/j.msea.2026.150435

• Chemical short-range order in complex concentrated alloys (CCAs): a review

  Materials Science and Engineering: A · 2026

  Aomin Huang, Audrey Cook, Sakshi Bajpai, Diran Apelian, Irene J. Beyerlein, Enrique J. Lavernia

  DOI: 10.1016/j.msea.2026.150558

• The Ti-Mesh Technique: Guided Bone Regeneration for Three-Dimensional Augmentations. Clinical Aspects: A Case Series

  The International Journal of Periodontics & Restorative Dentistry · 2022

  Piotr Majewski

  DOI: 10.11607/prd.5692

• Cold rolling induces strength-ductility synergy in a lightweight refractory high-entropy alloy

  Materials Science and Engineering: A · 2026

  Weijian Shen, Xiaoqing Yu, Yijing Fan, Jingzhi He, Bohang Shen, Yu Tang, Zhifeng Lei

  DOI: 10.1016/j.msea.2026.150562

• Densification mechanism and mechanical properties of alumina-based graded ceramics synergistically enhanced by multi-element rare-earth oxides

  Materials Science and Engineering: A · 2026

  Lexin Zhang, Guofu Yin, Guobin Qin, Zhen Tian, Hengbin Zhao, Qiang Jing, Jinxiao Bao, Qingchun Wang

  DOI: 10.1016/j.msea.2026.150530

• Annealing twin boundary widening drives 9R phase transformation in a gradient VCoNi medium-entropy alloy

  Materials Science and Engineering: A · 2026

  L.X. Zhang, W. Zhang, Q.R. Zhang, L. Li, W.Z. Han, Y.Q. Zhao

  DOI: 10.1016/j.msea.2026.150592

• Effect of aging heat treatment on microstructure and mechanical properties of electron beam welded Ti-3Al-5Mo-4Cr-2Zr-1Fe metastable β titanium alloy joints

  Materials Science and Engineering: A · 2026

  Laifa Ding, Chuanbao Jia, Caiyou Zeng, Chuansong Wu, Yupeng Zhang, Haiyan Wang

  DOI: 10.1016/j.msea.2026.150532

• Distinct creep behavior of martensite and ferrite in a Si-enriched heat resistance (SEHR) steel at 650/700°C

  Materials Science and Engineering: A · 2026

  Jun Zhang, Fanao Meng, Xinhao Zhang, Hao Ren, Decang Zhang, Yingxue Chen, Xiaoxin Zhang, Feifei Zhang, Qingzhi Yan

  DOI: 10.1016/j.msea.2026.150468

• Enabling cryogenic strength–ductility synergy in SUS316L via hierarchical microstructures induced by directed energy deposition repair

  Materials Science and Engineering: A · 2026

  Chahee Jung, Man Jae SaGong, Rae Eon Kim, Dae Cheol Yang, Hahun Lee, Seungjin Nam, Hyoung Seop Kim, Seok Su Sohn

  DOI: 10.1016/j.msea.2026.150520

• Coupled FCC→HCP→BCC transformation and void evolution control strain-rate-dependent work hardening in a metastable high-entropy alloy

  Materials Science and Engineering: A · 2026

  Zhengyuan Liu, Mengxue Jiao, Tuanwei Zhang, Tianxiang Bai, Wu-Rong Jian, Hyoung Seop Kim, Zhihua Wang

  DOI: 10.1016/j.msea.2026.150514

• A comprehensive study on the room-temperature rolling and tensile ductility of refractory high-entropy alloys

  Materials Science and Engineering: A · 2026

  Jacob Pustelnik, Ayeman Nahin, Bryan Nguyen, Tamanna Zakia, Michael Lau, Mingwei Zhang

  DOI: 10.1016/j.msea.2026.150512

• Effects of Ti content on microstructure, mechanical and magnetic properties of FeCoNiAl0.25Mn0.75Tix high entropy alloy

  Materials Science and Engineering: A · 2026

  Minh Duc Le, Thanh-Dat Nguyen, Tien-Dung Nguyen, Soo Yeol Lee, Hong Hai Nguyen, Mai Khanh Pham

  DOI: 10.1016/j.msea.2026.150516

• Achieving superior performance of wire-directed energy deposited 316L stainless steel through the synergic effect of in-process high-pressure rolling and post-heat treatment

  Materials Science and Engineering: A · 2026

  Yao Lu, Jun Wang, Hanxing Zhang, Jialuo Ding, Stewart Williams

  DOI: 10.1016/j.msea.2026.150575

• Exploiting solute segregation and partitioning to the deformation-induced planar defects and nano-martensite in designing ultra-strong Co-Ni base alloys

  Materials Science and Engineering: A · 2026

  Akshat Godha, Karthick Sundar, Mayank Pratap Singh, Shashwat Kumar Mishra, Praveen Kumar, B. Govind, Surendra Kumar Makineni

  DOI: 10.1016/j.msea.2026.150448

• Effects of Ni addition on microstructure and properties of a Cu-Zr alloy

  Materials Science and Engineering: A · 2026

  Xiyu Zhao, Hao Wang, Jiajun Xu, Wenhui Xu, Mingbiao Zhu, Yuchen Dou, Jianshi Wu, Zhiyun Zhu, Henglei Xu, Mingmao Li, Jing Zhang, Hao Huang

  DOI: 10.1016/j.msea.2026.150577

• Enhancing the strength-ductility synergy of laser-directed energy deposited AlNbTiVZr multi-principal element alloys at 873 K via phase regulation

  Materials Science and Engineering: A · 2026

  Yumeng Zhang, Leilei Wang, Longxiang Sun, Yi Wang, Xiaohong Zhan

  DOI: 10.1016/j.msea.2026.150574

• Achieving high strength and super isotropy via multiphase microstructural engineering and grain refinement in wire arc additively manufactured Al-Cu-Mg alloy

  Materials Science and Engineering: A · 2026

  Kun He, Jianglong Gu, Yingying Wang, Haoyan Wang, Wenzhuo Li, Zhefeng Xu, Chunlei Zheng, Jialuo Ding, Xinli Wang, Shanshan Wang

  DOI: 10.1016/j.msea.2026.150524

• Achieving high strength and ductility in selective laser melting AlSi10Mg composites through ZnO-Cu dual addition

  Materials Science and Engineering: A · 2026

  Kang Zhang, Xingfu Wang, Lingxiao Hu, Zimu Shi, Xuemei Teng, Zhendong Li

  DOI: 10.1016/j.msea.2026.150477

• Enhanced cryogenic strength of directed energy deposited 316L through TiC reinforcement and its deformation mechanisms

  Materials Science and Engineering: A · 2026

  Gyumi Han, Levin Sebastian Cahyaputra, Yoon-Uk Heo, Jin Woo Kim, Wenyi Huo, Jung Gi Kim, Hyoung Seop Kim

  DOI: 10.1016/j.msea.2026.150521

• Evolution of the mechanical performance of a non-equiatomic Zr-Hf-Ti-Al-Co-Ni-Cu high entropy metallic glass through crystallization

  Materials Science and Engineering: A · 2026

  S. González, J. López, A. Ridruejo, G. Alvarez, S.P. Singh, Y. Kong, M. Torres, Devinder Singh, P. Ramasamy, J. Eckert, A. Bautista, F. Velasco

  DOI: 10.1016/j.msea.2026.150443

• Effects of CoCrNi-based fillers on the mechanical properties of high-manganese steel welded joints at room and cryogenic temperatures

  Materials Science and Engineering: A · 2026

  Dejia Liu, Guodong Lv, Haitao Xiao, Yong Hu, Haitao Jiao, Longzhi Zhao, Dongdong Chen

  DOI: 10.1016/j.msea.2026.150552

• Effect of Ag addition on the service performance of Cu-Ni-Si-Co-Mg alloys

  Materials Science and Engineering: A · 2026

  Yushuai Han, Jing Xu, Bo Guan, Yuhong Li, Wenzheng Liu, Dan Wu, Hong Yan, Zhi Hu, JiaHao Wang, Qiang Hu

  DOI: 10.1016/j.msea.2026.150597

• Development and characterization of oxide dispersion strengthened Ni-Mo alloys for enhanced performance in harsh environments

  Materials Science and Engineering: A · 2026

  Xinchang Zhang, Michael McMurtrey, Jingfan Yang, Qiufeng Yang, Ruchi Gakhar, Jia-Hong Ke, Jorgen Rufner, Rongjie Song

  DOI: 10.1016/j.msea.2026.150481

• Enhanced fatigue performance in aluminum alloys via texture engineering: A review

  Materials Science and Engineering: A · 2026

  Mehrangiz Kazemi, Roohollah Jamaati

  DOI: 10.1016/j.msea.2026.150482

• Effects of Mn/Sb microalloying on the microstructure, precipitation kinetics, and room-/elevated-temperature mechanical properties of A357 aluminum alloy

  Materials Science and Engineering: A · 2026

  Zhan Cui, Yunlong Huang, Liao Hengcheng, Xihui Pan, Huiting Guo, Fan Wu

  DOI: 10.1016/j.msea.2026.150554

• Engineering heterostructures for strength-ductility synergy in an FCC Al0.3CoCrFeNi high-entropy alloy via elevated-temperature rolling

  Materials Science and Engineering: A · 2026

  Kang Zhang, Yue Liu, Na Xiao, Kaichao Zhang, Lei Li, Chi Chu, Lu Zhang, Haile Yan, Peter Hodgson, Minghui Cai

  DOI: 10.1016/j.msea.2026.150513

• Fe–1C–3Mn low-density nano-bainitic steels: Influence of 6.1 and 8.0 wt% Al on transformation kinetics, microstructure and mechanical properties

  Materials Science and Engineering: A · 2026

  Serkan Turan, Johannes Buhl, Quan Shan, Heinz Palkowski

  DOI: 10.1016/j.msea.2026.150476

• Coupled regulation of recrystallization and precipitation by Sc addition and Cu content in Al-Zn-Mg-Cu alloys

  Materials Science and Engineering: A · 2026

  Simeng Jiang, Weijie Fan, Yanlin Wang, Xiaohua Chen, Zidong Wang

  DOI: 10.1016/j.msea.2026.150572

• Difference in microstructure of coarse dendritic and equiaxed Al-Cu-Ce-based alloys after extrusion and the mechanisms of room-temperature plasticity improvement and elevated-temperature strength degradation

  Materials Science and Engineering: A · 2026

  Jing Wang, Haodong Li, Shuai Dong, Fulin Wang, Fenghua Wang, Jian Zeng, Li Jin, Jie Dong

  DOI: 10.1016/j.msea.2026.150583

• Effect of grain size and grain-boundary-mediated deformation on high-temperature deformation and DRX behavior of a γ/γ' Ni-based superalloy near the upper service temperature

  Materials Science and Engineering: A · 2026

  Xinyu Meng, Shaomin Lyu, Xingfei Xie, Chao Tang, Jian Jia, Jinglong Qu

  DOI: 10.1016/j.msea.2026.150523

• Effect of heat treatment on the creep properties and microstructural evolution of stainless steel 316L produced by laser powder bed fusion

  Materials Science and Engineering: A · 2026

  L.A. Ávila Calderón, L. Agudo Jácome, A. Ulbricht, R. Saliwan Neumann, B. Rehmer, A. Evans, B. Skrotzki

  DOI: 10.1016/j.msea.2026.150429

• High-pressure solution treating and aging for additive manufactured near-alpha Ti6242 alloy: effects on microstructural properties and high-temperature tensile behaviour

  Materials Science and Engineering: A · 2026

  Gianluca Pirro, Lisa T. Belkacemi, Alessandra Martucci, Mika León Altmann, Filippo Gaiba, Alessandro Morri, Anastasiya Toenjes, Mariangela Lombardi, Lorella Ceschini

  DOI: 10.1016/j.msea.2026.150522

• Fracture mechanisms of notched TiB2/Al-Zn-Mg-Cu composite

  Materials Science and Engineering: A · 2026

  Yuruo Chen, Jiwei Geng, Tai Luo, Peikang Xia, Yugang Li, Yi Shi, Dong Chen, Haowei Wang

  DOI: 10.1016/j.msea.2026.150515

• Enhanced thermal cycle stability by nanoparticles to overcome thermally induced cracking in die steel

  Materials Science and Engineering: A · 2026

  Chuan-De Li, Hong-Yu Yang, Bai-Xin Dong, Shi-Li Shu, Feng Qiu, Qi-Chuan Jiang, Lai-Chang Zhang

  DOI: 10.1016/j.msea.2026.150518

• Hot deformation behavior and microstructural evolution of additively manufactured A205 aluminium Alloy: As-Built and heat-treated conditions

  Materials Science and Engineering: A · 2026

  Ali Shojaei Zoeram, Babak Shalchi Amirkhiz, Clodualdo Aranas, Nafiseh Zaker, Mohsen Mohammadi

  DOI: 10.1016/j.msea.2026.150570

• Hot workability and damage behavior in a BCC + B2 refractory high entropy superalloy

  Materials Science and Engineering: A · 2026

  Yu Zhang, Junxiao Xu, Wei Wu, Yiren Wang, Fuhua Cao

  DOI: 10.1016/j.msea.2026.150531

• Effect of laser heat treatment on fatigue crack growth in AA2198-T851 thin sheets under constant-amplitude and spectrum loadings

  Materials Science and Engineering: A · 2026

  C.P. Carvalho, J.P. Pascon, M.S.F. Lima, L. Molent, C.A.R.P. Baptista

  DOI: 10.1016/j.msea.2026.150453

• Impact of active cooling and CTWD on phase stability and fracture behavior of WAAM-fabricated maraging steel 250

  Materials Science and Engineering: A · 2026

  Thaissa Sampaio Nunes, Julianna Magalhães Garcia, Renan de Melo Correia Lima, Diandro Bailoni Fernandes, Leonardo Barbosa Godefroid, Louriel Oliveira Vilarinho, Luiz Paulo Brandao

  DOI: 10.1016/j.msea.2026.150548

• Improvement of creep resistance in Ni-based superalloys via compact γ'/γ'' co-precipitation design

  Materials Science and Engineering: A · 2026

  Shengyu Zhou, Xiaochen Zhang, Chong Li, Qianying Guo, Xingchuan Xia, Yongchang Liu

  DOI: 10.1016/j.msea.2026.150566

• High-value utilization of powder by-products in fabricating high strength 6061 aluminum alloy through powder forging

  Materials Science and Engineering: A · 2026

  Yizhe Meng, Pengpeng Huang, Qianhang Cui, Yake Wu, Hualei Wang, Feng Jiang, Jun Sun

  DOI: 10.1016/j.msea.2026.150571

• Impact of anisotropy and strengthening mechanisms on the fatigue behaviour of laser powder bed fusion processed (FeCoNi)86Al7Ti7 high-entropy alloy

  Materials Science and Engineering: A · 2026

  Pablo M. Cerezo, Teresa Guraya, Jose A. Aguilera, Alejandro S. Cruces, Zhangwei Chen, Zhiyuan Liu, Zhan Wen Chen, Pablo Lopez-Crespo

  DOI: 10.1016/j.msea.2026.150534

• A strategy for intermediate-temperature plasticity control in polycrystalline alloys based on equal-cohesive temperature

  Materials Science and Engineering: A · 2026

  Hao Liu, Xinbao Zhao, Jiachen Xu, Wanshun Xia, Quanzhao Yue, Yong Yuan, Yuefei Zhang, Yuefeng Gu, Ze Zhang

  DOI: 10.1016/j.msea.2026.150454

• Effects of AlNiCrCuTi high entropy alloy addition and T6 heat treatment on the microstructure evolution and mechanical properties enhancement of Al-Mg-Si alloys

  Materials Science and Engineering: A · 2026

  Jilong Kang, Bingxi Miao, Chengliang Yang, Zhenpeng Wei, Xiaohu Qiang, Shunhua Wang

  DOI: 10.1016/j.msea.2026.150538

• Impact toughness at room and cryogenic temperatures of maraging steel fabricated by wire-arc additive manufacturing

  Materials Science and Engineering: A · 2026

  Chunjie Li, Shun Guo, He Li, Zhanqing Yang, Jinchu Wan, Hao Wu, Yong Peng, Qi Zhou, Kehong Wang

  DOI: 10.1016/j.msea.2026.150585

• In-situ alloyed nitrogen doping enhances mechanical properties of medium-entropy alloys through lattice distortion and increased dislocation density

  Materials Science and Engineering: A · 2026

  Jinqiang Shi, Huachang Lei, Caitao Fan, Zhibin Wu, Lunhua He, Kang Sun, Gang Wang

  DOI: 10.1016/j.msea.2026.150525

• In-situ neutron diffraction investigation of deformation mechanisms in an additively manufactured medium-entropy alloy with coherent nanoprecipitates

  Materials Science and Engineering: A · 2026

  Jinqiang Shi, Liming Gu, Sihao Deng, Jiazheng Hao, Huaile Lu, Chang Ren, Jingli Ren, Lunhua He, Gang Wang

  DOI: 10.1016/j.msea.2026.150380

• Unveiling heterogeneous microstructure and deformation behavior in laser-directed energy deposition repaired wrought Ti-6Al-4V thin walls

  Materials Science and Engineering: A · 2026

  Ruixin Wang, Ruixin Zhao, Tingwei Cao, Yuyang Hou, Songzhe Xu, Ninshu Ma, Ting Rong, Mingliang Li, Jiang Wang, Chaoyue Chen, Zhongming Ren

  DOI: 10.1016/j.msea.2026.150480

• Influence of laser power on the microstructure and mechanical properties of Ti-50Ta alloy prepared by L-PBF

  Materials Science and Engineering: A · 2026

  Shaodi Wang, Shufeng Li, Tianlong Zhang, Dongxu Hui, Huiying Liu, Chong Tan, Zefeng Wu, Shaolong Li, Xin Zhang, Shengyin Zhou, Bo Li, Jianye Han, Shuyan Zhang, Yongfeng Chen, Dawei Zhang, Katsuyoshi Kondoh, Junko Umeda, Ammarueda Issariyapat, Shoto Kariya

  DOI: 10.1016/j.msea.2026.150578

• Effect of remelting scanning strategy on laser powder bed fusion of NdFeB permanent magnets: Microstructure, cracks and magnetic properties

  Materials Science and Engineering: A · 2026

  Guoxuan Ming, Hao Dong, Ketai He, Yangwei Du, Chaofang Dong

  DOI: 10.1016/j.msea.2026.150555

• Investigating synergistic effects of process-induced defects and α phase substructures on the mechanical response of additively manufactured Ti-6Al-4V alloy via an integrated numerical framework

  Materials Science and Engineering: A · 2026

  Hanqing Liu, Fabien Briffod, Takayuki Shiraiwa

  DOI: 10.1016/j.msea.2026.150551

• Effect of beam offset on the microstructure and mechanical properties of electron beam welded joints between Ta and GH4169 alloy

  Materials Science and Engineering: A · 2026

  Likuo Zhu, Guoqing Chen, Qianxing Yin, Shangwei Lu, Xinyan Teng, Zhanhua Gan, Junhong Zhao, Xuesong Leng

  DOI: 10.1016/j.msea.2026.150466

• Microstructure and creep properties of near- and hyper-eutectic Al-Ce-Fe alloys processed by laser powder bed fusion

  Materials Science and Engineering: A · 2026

  Logan P. White, David C. Dunand

  DOI: 10.1016/j.msea.2026.150479

• Local chemical ordering tuning the strength and ductility synergy of a Nitrogen-doped CoNiV multicomponent alloy

  Materials Science and Engineering: A · 2026

  Zhe Li, Kefu Gan

  DOI: 10.1016/j.msea.2026.150553

• Metastability engineering for TWIP-dominated plasticity with localized α” martensite activity in ω-strengthened metastable β Ti-6311 alloy

  Materials Science and Engineering: A · 2026

  Irfan Ali Abro, Lin Yang, Qunbo Fan, Kamal Mustafa

  DOI: 10.1016/j.msea.2026.150510

• Microstructure and strengthening mechanisms of a microalloyed Ta-10W alloy fabricated by laser powder bed fusion

  Materials Science and Engineering: A · 2026

  Xijian Zhang, Jie Wang, Kaiju Lu, Jugan Zhang, Xu Li, Xingrong Chu, Xiubing Liang

  DOI: 10.1016/j.msea.2026.150593

• Manipulating microstructure and mechanical properties of 17-4 PH steel in directed energy deposition: the role of heat input in intrinsic heat treatment

  Materials Science and Engineering: A · 2026

  Zhiwei Lyu, Ziyan Tang, Su Li, Ya Tang, Yue Zhao, Yutaka S. Sato, Jinwen Qian, Yifeng Xiao

  DOI: 10.1016/j.msea.2026.150557

• Microstructure and mechanical study of Al-Si3N4/ 6063 Al laminated composite fabricated by porthole die co-extrusion and forging

  Materials Science and Engineering: A · 2026

  Guanghan Dang, Liang Chen, Lujie Zhang, Jianwei Tang, Xiaoxue Chen, Cunsheng Zhang, Guoqun Zhao

  DOI: 10.1016/j.msea.2026.150560

• Microstructure and high-temperature tensile properties of a near-eutectic Al-2Fe-2Cr-1Mn-0.7Zr (wt.%) alloy designed for additive manufacturing

  Materials Science and Engineering: A · 2026

  Tristan Lenoir, Matthieu Ricard, Béchir Chehab, Isabelle Mouton, Florence Robaut, Frédéric De Geuser, Arthur Després, Guilhem Martin

  DOI: 10.1016/j.msea.2026.150568

• Microstructure and slip-mediated deformation-fracture in extrusion-printed 95W-Ni-Fe alloy

  Materials Science and Engineering: A · 2026

  Zhikai Li, Hang Fu, Zuosheng Li, Yifan Han, Tianhao Wu, Qingshan Cai, Yunzhu Ma, Wensheng Liu

  DOI: 10.1016/j.msea.2026.150539

• Plastic deformation in nanotwinned copper mediated by source mechanisms based on Frank dislocations

  Materials Science and Engineering: A · 2026

  D. Liu, D. Weygand, J. Li, C. Kirchlechner, P. Gumbsch

  DOI: 10.1016/j.msea.2026.150362

• Overcoming silicon embrittlement in ultra-high-Si β-21S composites via solution treatment

  Materials Science and Engineering: A · 2026

  Jiamu Liu, Hao Ding, Zhiqi Wang, Xiping Cui, Dounan Chen, Kanghe Jiang, Taiquan Zhang, Zizhou Xiao, Cheng Long, Xiuwen Ren, Se-Eun Shin, Zhennian Wang, Mao Liu

  DOI: 10.1016/j.msea.2026.150573

• Microstructure evolution and mechanical properties of FGH99 superalloy TLP joints bonded with nickel-based interlayer

  Materials Science and Engineering: A · 2026

  Xinrong Li, Yunjia Huang, Wei Guo, Weiyang Zhao, Wenqing Song, Bosong Tao, Yeming Guo

  DOI: 10.1016/j.msea.2026.150567

• Microstructure evolution and mechanical properties of a Cu-Cr alloy by alternating cyclic stress loading at room-temperature

  Materials Science and Engineering: A · 2026

  Qiang Gao, Bing Ye, Wei Huang, Fei Zhou, Zhifeng Zhou

  DOI: 10.1016/j.msea.2026.150556