公开文献目录 · 658
已审核文献 81445 · 658 / 815
Laser powder bed fusion of a novel CoCrNixV0.5 multi-component alloys system: Effect of Ni content on microstructure evolution and mechanical properties
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150489Microstructure evolution and strain hardening behavior for a dual-phase Si-enriched heat resistant (SEHR) steel during long-term aging at 500°C and 600°C
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150581Microstructure-dependent slip activation and transfer governing the strength-ductility synergy in L-PBF TC4 alloy
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150569Sc2O3-induced elemental enrichment for improving the thermal stability of Al-Cu-Mg-Sc alloys
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150605Regulated two-step aging for strength-conductivity synergy in Cu-Ni-Si-Cr alloy
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150533Pore architecture-controlled permeability and mechanical behavior of Ti-6Al-4V designed materials fabricated by laser powder bed fusion
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150511Sequential enrichment of Nb and V during clustering and its impact on dislocation interactions in strip-cast microalloyed steel
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150579Strength-ductility synergy enabled by discontinuous cellular substructure in a Nb-doped CoCrNi medium-entropy alloy fabricated by laser powder bed fusion
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150603Revealing the influencing mechanism of Co content on the microstructure and properties of Cu-2.6(Ni, Co)-0.6Si alloy
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150608Superior interfacial properties from multiscale strengthening: dynamic vs. quasi-static processing of Cu-/Ni-based bimetallics
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150517Synergistic effects of annealing and deformation temperatures on mechanical properties of Al-Mg-Sc-Zr alloy
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150472Subgrain-boundary segregation drives synergistic strengthening via in situ precipitation and direct aging in additively manufactured Inconel 625
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150461Synergistic strength–ductility–conductivity enhancement in nanotwinned Cu foils via light Mn doping and twin boundary engineering
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150455Sustaining excellent strength and toughness in high-Cr die steel via trace nano-ceramic particle modification under cyclic thermal exposure
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150471Synergistic strengthening in a Co-free Fe–Ni-based medium-entropy alloy via heterogeneous structure and lamellar L12 precipitates
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150580Resistance seam welding assisted electron beam cladding of AlxCoCrFeNiCu0.4 high-entropy alloy coatings: microstructural evolution and crack inhibition mechanism
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150536Tailoring strength–ductility synergy in Al-Cu-Mg-Ag alloy through controlled cold pre-deformation
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150591Tuning oxidation behavior of VCoNi medium entropy alloy via Al doping
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150563Synergistic strengthening and toughening of a harmonic-structured (FeCoNi)86Al7Ti7 high-entropy alloy via nanoscale precipitation
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150463Tailoring additive manufacturability and high-temperature strength in Ni-based superalloys via oxide nanoparticle additions
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150519Underlying mechanisms of deformation, microstructure and properties of ultra-high-strength 7034 aluminum alloy after rapid heating
Materials Science and Engineering: A · 2026
DOI: 10.1016/j.msea.2026.150473中国临床血脂检测指南(2026版)
中华检验医学杂志 · 2026
DOI: 10.3760/cma.j.cn114452-20260213-001102026 ACC/AHA/AACVPR/ABC/ACPM/ADA/AGS/APhA/ASPC/NLA/PCNA Guideline on the Management of Dyslipidemia
JACC · 2026
DOI: 10.1016/j.jacc.2025.11.016American Association of Clinical Endocrinology Consensus Statement: Algorithm for Management of Adults with Dyslipidemia – 2025 Update
Endocrine Practice · 2025
DOI: 10.1016/j.eprac.2025.07.014A minimally invasive method for titanium mesh fixation with resorbable sutures in guided bone regeneration: A retrospective study
Clinical Implant Dentistry and Related Research · 2023
DOI: 10.1111/cid.13147《2019 年欧洲心脏病学会/欧洲动脉粥样硬化学会血脂异常管理指南》——老年人血脂管理解读
中国介入心脏病学杂志 · 2019
DOI: 10.3969/j.issn.1004-8812.2019.09.004中国血脂管理指南(基层版2024 年)
中国循环杂志 · 2024
DOI: 10.3969/j.issn.1000-3614.2024.04.001“Guess I'm Next to be Erased”: street art, heritage and gentrification in George Town, Malaysia
Urban Geography · 2025
DOI: 10.1080/02723638.2025.2524635美学区牙槽骨解剖特征对引导骨再生效果的影响
中国口腔种植学杂志 · 2023
DOI: 10.12337/zgkqzzxzz.2023.02.009牙槽骨缺损修复的组织工程新进展
西部医学 · 2025
DOI: 10.3969/j.issn.1672-3511.2025.03.028[Assessment of the clinical effect regarding three-dimensional printing individualized titanium mesh for bone augmentation in the esthetic area]
中华口腔医学杂志 · 2020
DOI: 10.3760/cma.j.cn112144-20200702-00393个性化预成型钛网引导骨再生在前牙美学区水平骨增量中的临床效果
北华大学学报(自然科学版) · 2026
DOI: 10.11713/j.issn.1009-4822.2026.03.021Socket healing with and without immediate implant placement
Periodontology 2000 · 2019
DOI: 10.1111/prd.12252In vitro application of drug-loaded hydrogel combined with 3D-printed porous scaffolds
Biomedical Materials · 2022
DOI: 10.1088/1748-605x/ac9943Association of body mass index and computed tomography-derived body composition with postoperative cardiovascular events: a secondary analysis of two prospective cohorts
British Journal of Anaesthesia · 2026
DOI: 10.1016/j.bja.2026.05.059Preoperative electrocardiography for predicting cardiovascular events after noncardiac surgery: a secondary analysis of two prospective cohorts
British Journal of Anaesthesia · 2026
DOI: 10.1016/j.bja.2026.06.025Flapless Postextraction Socket Implant Placement in the Esthetic Zone: Part 1. The Effect of Bone Grafting and/or Provisional Restoration on Facial-Palatal Ridge Dimensional Change—A Retrospective Cohort Study
International Journal of Periodontics & Restorative Dentistry · 2014
DOI: 10.11607/prd.1821股前外侧皮瓣复合个性化钛网支架在上颌骨缺损修复中的应用
现代肿瘤医学 · 2023
DOI: 10.3969/j.issn.1672-4992.2023.24.0123D打印技术辅助个性化钛网联合颊脂垫和前臂皮瓣修复上颌骨缺损
温州医科大学学报 · 2018
DOI: 10.3969/j.issn.2095-9400.2018.06.0083D打印个性化钛网修复严重牙槽骨缺损的短期效果观察
中国口腔种植学杂志 · 2021
DOI: 10.12337/zgkqzzxzz.2021.12.0063D打印数字化个性化钛网对复杂牙槽骨缺损的修复效果及对骨增量的影响
医疗装备 · 2025
DOI: 10.3969/j.issn.1002-2376.2025.17.015中国脑卒中患者并发卒中相关性肺炎的危险因素及其病原学特征的Meta 分析
中国循证医学杂志 · 2025
DOI: 10.7507/1672-2531.202502054Flapless Postextraction Socket Implant Placement, Part 2: The Effects of Bone Grafting and Provisional Restoration on Peri-implant Soft Tissue Height and Thickness— A Retrospective Study
The International Journal of Periodontics & Restorative Dentistry · 2015
DOI: 10.11607/prd.2178Long-term results in three-dimensional, complex bone augmentation procedures with customized titanium meshes
Clinical Oral Implants Research · 2022
DOI: 10.1111/clr.14000A randomized controlled trial to compare aesthetic outcomes of immediately placed implants with and without immediate provisionalization
Journal of Clinical Periodontology · 2019
DOI: 10.1111/jcpe.13171Consensus Statements and Recommended Clinical Procedures Regarding Optimizing Esthetic Outcomes in Implant Dentistry
The International Journal of Oral & Maxillofacial Implants · 2014
DOI: 10.11607/jomi.2013.g3Spontaneous bone regeneration in segmental mandibular defects: 2 cases report and literature review
DOAJ (DOAJ: Directory of Open Access Journals) · 2025
DOI: 10.12439/kqhm.1005-4979.2025.01.015荨麻提取物诱导骨膜细胞增殖分化:构建组织工程骨及超微结构的变化
中国组织工程研究 · 2018
DOI: 10.3969/j.issn.2095-4344.0196[Neural regulation mechanism in bone regeneration]
中华口腔医学杂志 · 2025
DOI: 10.3760/cma.j.cn112144-20250804-00298工程化干细胞仿生骨膜协调免疫炎症及血管化促进骨再生
中国组织工程研究 · 2026
DOI: 10.12307/2025.551紫堇醇灵碱通过调节巨噬细胞极化改善骨髓间充质干细胞成骨性能分析
中华老年口腔医学杂志 · 2025
DOI: 10.19749/j.cn.cjgd.1672-2973.2025.06.002单上前牙即拔即种即刻修复和延期种植修复美学效果及保存率分析
全科口腔医学电子杂志 · 2019
DOI: 10.16269/j.cnki.cn11-9337/r.2019.23.001Submental artery perforator flap for repair of orbital defect of lacrimal sac carcinoma: A case report and literature review
DOAJ (DOAJ: Directory of Open Access Journals) · 2025
DOI: 10.12439/kqhm.1005-4979.2025.01.014Efficacy of adjunctive systemic or local antibiotic therapy in peri-implantitis: a systematic review and meta-analysis of randomized controlled clinical trials
Journal of Zhejiang University-SCIENCE B · 2025
DOI: 10.1631/jzus.b2300730不同体位对经皮肾镜取石术临床效果影响的网状Meta 分析
中国循证医学杂志 · 2025
DOI: 10.7507/1672-2531.202501103Mandibular advancement with clear aligners and functional appliances in the treatment of skeletal ClassIImalocclusion: a systematic review and meta-analysis
华西口腔医学杂志 West China Journal of Stomatology · 2023
DOI: 10.7518/hxkq.2023.2022453帐篷技术用于牙槽嵴增量的Meta分析
中国口腔种植学杂志 · 2023
DOI: 10.12337/zgkqzzxzz.2023.10.010Schroth 疗法治疗青少年特发性脊柱侧凸效果的Meta 分析
中国循证医学杂志 · 2025
DOI: 10.7507/1672-2531.2025020643D 打印个性化钛网引导种植区骨再生的临床并发症研究
口腔医学 · 2022
DOI: 10.13591/j.cnki.kqyx.2022.03.0113D 打印个性化钛网应用于复杂牙槽骨缺损的临床疗效分析
上海口腔医学 · 2025
DOI: 10.19439/j.sjos.2025.04.0093D打印个性化钛网在口腔种植骨增量中的研究进展
口腔颌面修复学杂志 · 2023
DOI: 10.19748/j.cn.kqxf.1009-3761.2023.6.0103D打印个性化钛网用于复杂牙槽骨缺损重建的临床思考
中国实用口腔科杂志 · 2025
DOI: 10.19538/j.kq.2025.06.0083D打印个性化钛网用于重度牙槽骨缺损重建的临床考量
中国实用口腔科杂志 · 2025
DOI: 10.19538/j.kq.2025.04.002[Clinical and histological evaluation of three-dimensional printing individualized titanium mesh for alveolar bone defect repair]
华西口腔医学杂志 · 2025
DOI: 10.7518/hxkq.2025.2024481牙槽突裂治疗方法的研究进展
国际口腔医学杂志 · 2016
DOI: 10.7518/gjkq.2016.04.014牙槽突裂植骨术的研究进展
中国美容医学 · 2025
DOI: 10.15909/j.cnki.cn61-1347/r.006923杜仲及其活性成分治疗骨质疏松症相关信号通路的研究进展
临床医学研究与实践 · 2026
DOI: 10.19347/j.cnki.2096-1413.202603048生物材料在牙槽突裂治疗中的应用
宁夏医学杂志 · 2023
DOI: 10.13621/j.1001-5949.2023.02.019014例牙槽突裂种植修复临床效果分析
The HKU Scholars Hub (University of Hong Kong) · 2025
DOI: 10.19439/j.sjos.2025.03.018材料结构对骨再生中血管生成的影响
昆明医科大学学报 · 2025
DOI: 10.12259/j.issn.2095-610x.s20250919富含黄酮类化合物的中药材在骨质疏松治疗中的研究进展
中医临床研究 · 2025
DOI: 10.3969/j.issn.1674-7860.2025.18.015复合纳米纤维骨膜促进血管化和成骨矿化的体外实验
中国组织工程研究 · 2023
DOI: 10.12307/2023.163颌骨骨膜成骨的机制及临床应用
内蒙古医学杂志 · 2015
DOI: 10.16096/j.cnki.nmgyxzz.2015.47.05.020Clinical study on osteogenic effect of sticky bone and autologous iliac cancellous bone graft in repairing unilateral alveolar cleft
DOAJ (DOAJ: Directory of Open Access Journals) · 2025
DOI: 10.3969/j.issn.1674-8115.2025.08.009复杂牙槽骨缺损临床解决方案的探索与思考
中国口腔种植学杂志 · 2022
DOI: 10.12337/zgkqzzxzz.2022.10.005基于TGFβ1/Smad信号通路在骨髓间充质干细胞修复骨质疏松大鼠牙槽骨缺损的机制研究
临床口腔医学杂志 · 2023
DOI: 10.3969/j.issn.1003-1634.2023.11.002预成型钛网联合胶原膜及PRF在前牙牙槽嵴严重骨缺损种植中的应用
中国美容医学 · 2024
DOI: 10.15909/j.cnki.cn61-1347/r.006475个性化钛网辅助修复大范围下颌牙槽骨缺损的静态力学分析
中国口腔种植学杂志 · 2025
DOI: 10.12337/zgkqzzxzz.2025.02.0043D打印个性化钛网辅助下的引导骨再生与块状自体骨移植在复杂牙槽骨缺损重建中的临床回顾性研究
中国口腔种植学杂志 · 2024
DOI: 10.12337/zgkqzzxzz.2024.04.012自体骨移植修复牙槽骨缺损的研究进展
中国口腔颌面外科杂志 · 2025
DOI: 10.19438/j.cjoms.2025.01.0153D打印个性化钛网的GBR术及PRF/Bio-Oss复合物修复牙槽骨缺损的应用
重庆医科大学学报 · 2025
DOI: 10.13406/j.cnki.cyxb.0038473D打印个性化钛网用于修复严重牙槽骨缺损的临床效果——一项回顾性病例系列研究
中国口腔种植学杂志 · 2025
DOI: 10.12337/zgkqzzxzz.2025.02.0063D打印个性化钛网在牙种植区骨增量中的应用
口腔医学研究 · 2023
DOI: 10.13701/j.cnki.kqyxyj.2023.05.001CGF/Bio-Oss 复合物结合引导骨组织再生术在牙槽骨缺损患者种植修复中的应用:一项随机对照试验
现代生物医学进展 · 2026
DOI: 10.13241/j.cnki.pmb.2026.02.004浓缩生长因子在颌骨缺损修复中的应用效果Meta分析
中国美容医学 · 2026
DOI: 10.15909/j.cnki.cn61-1347/r.0072233D 打印仿生生物陶瓷支架修复颌骨缺损的特点与策略
中国组织工程研究 · 2026
DOI: 10.12307/2026.653影响3D 打印个性化钛网骨增量效果的原因与对策
口腔疾病防治 · 2025
DOI: 10.12016/j.issn.2096⁃1456.202440359左旋咪唑或联合中药治疗复发性阿弗他口腔溃疡的系统评价与Meta分析
口腔医学研究 · 2015
DOI: 10.13701/j.cnki.kqyxyj.2015.05.013[Advances in Molecular Regulatory Mechanisms of Jaw Repair and Reconstruction]
四川大学学报(医学版) · 2024
DOI: 10.12182/20240160101胶原蛋白海绵预防拔牙术后并发症及促进牙槽骨再生的Meta分析
中国研究型医院(中英文) · 2026
DOI: 10.19450/j.cnki.jcrh.2026.02.006口腔牙槽骨缺损的再生修复
中国组织工程研究 · 2026
DOI: 10.12307/2026.011Volumetric facial contour changes of immediately placed implants with and without immediate provisionalization
Journal of Periodontology · 2020
DOI: 10.1002/jper.19-0308Novel NRAS G12D mutation in extraosseous/peripheral ameloblastoma: Case report and review of mitogen-activated protein kinase pathway mutations in extraosseous/peripheral and intraosseous ameloblastomas
Journal of Dental Sciences · 2024
DOI: 10.1016/j.jds.2024.05.010Clinical outcome of alveolar ridge augmentation with individualized CAD-CAM-produced titanium mesh
International Journal of Implant Dentistry · 2017
DOI: 10.1186/s40729-017-0097-zThe Esthetic Biological Contour ( EBC ) Concept 2.0: How to Manage Each Zone of the Implant Restoration Emergence Profile
Journal of Esthetic and Restorative Dentistry · 2026
DOI: 10.1111/jerd.70086The esthetic biological contour concept for implant restoration emergence profile design
Journal of Esthetic and Restorative Dentistry · 2021
DOI: 10.1111/jerd.12714A digital technique for fabricating implant-supported interim restorations in the esthetic zone
The Journal of Prosthetic Dentistry · 2018
DOI: 10.1016/j.prosdent.2017.05.006Risk of Secondary Injury in Younger Athletes After Anterior Cruciate Ligament Reconstruction: A Systematic Review and Meta-analysis
The American Journal of Sports Medicine · 2016
DOI: 10.1177/0363546515621554Effects of school-based neuromuscular training on fundamental movement skills and physical fitness in children: a systematic review
PeerJ · 2022
DOI: 10.7717/peerj.13726All in her head: dismantling medical misogyny in disorders of gut–brain interaction
The Lancet Gastroenterology & Hepatology · 2026
DOI: 10.1016/s2468-1253(26)00095-6